Tuttnauer LabSci 11-V, Руководство по эксплуатации и обслуживанию, Страница: 7 / 97

Page 6
WR
In WR (Water Recycling) models, water is saved by the water saving
system, because it recycles the water and re-uses it for each cycle in
the following way:
•
Water inlet by the pump from the reservoir and not direct from the
plumbing.
•
On slow/fast exhaust, the water gets into the reservoir.
F
There is a configuration equipped with fan that allows to shorten the
cooling operation.
1.2 Incoming Inspection
The autoclave should be unpacked and inspected for mechanical
damage upon receipt. Observe packing method and retain packing
materials until the unit has been inspected. Mechanical inspection
involves checking for signs of physical damage such as: scratched
panel surfaces, broken knobs, etc.
If damage is apparent, contact your dealer or point of purchase, so that
they may notify the manufacturer and file a claim with the appropriate
carrier.
All Tuttnauer products are carefully inspected prior to shipment and all
reasonable precautions are taken in preparing them for shipment to
assure safe arrival at their destination.
1.3 Warranty
We certify that this instrument is guaranteed to be free from defects in
material and workmanship for one year against faulty components and
assembly except for glassware, lamps, and heaters.
The warranty does not include and does not replace routine
treatment and preventive maintenance to be performed according
to instructions in sec. 11.1 (Preventive Maintenance).
Our obligation is limited to replacing the instrument or parts, after our
examination, if within one year after the date of shipment they prove to
be defective. This warranty does not apply to any instrument that has
been subjected to misuse, neglect, accident or improper installation or
application, nor shall it extend to products that have been repaired or
altered outside the factory without prior authorization from us.
The Autoclave should not be used in a manner not described in
this manual!