Page 67
7.2
Screens following aborted cycles after complete
sterilization stage
The sterilization phase ended successfully
– cycle ended, and the
reason of failure is displayed
For example, the next two scenarios:
7.2.1
Canceled by user after complete sterilization stage
The cycle ended successfully, the reason for aborted cycle is
displayed.
7.2.2
Pressure Time Error Failure occurrence after complete
sterilization stage
The cycle ended successfully; the reason of failure is displayed.
7.3
Screens following a fail cycle:
In this case, the display becomes yellow, a warning sign
and
the reason of failure will be displayed.
For example, the next two scenarios:
7.3.1 Failure according to Pressure Time Error
Содержание LabSci 11-V
