Page 49 of 51
11
TROUBLESHOOTING
This troubleshooting chart enables the user to solve minor malfunctions prior to
requesting service.
Only technical personnel having proper qualifications and holding technical
documentation (including a technician manual) and adequate information are
authorized to service the apparatus.
Problem
Solution
1.
Display is not
activated
1.1.
Check the power source and verify that it is
according to specifications.
1.2.
Verify that the ON/OFF switch is in the ‘On’
position.
1.3.
Make sure the power cord is properly connected to
the
machine
and
the
mains
(see
rear
view
drawing).
1.4.
Check the reset button on the cut-out thermostat.
Reset if necessary.
1.5.
Make sure the circuit breaker has not tripped.
Reset if necessary.
2.
The printer prints,
but nothing is
printed on the paper
2.1.
Verify that the printing paper is inserted correctly
(see para. 6.3.1 Printing Paper)
3.
The printer does
not print
3.1.
Make sure the paper is inserted in the printer (see
para. 6.3.1 Printing Paper)
3.2.
Contact your dealer to solve the problem.
4.
When the machine
is switched on, the
printer feeds paper
all the time
4.1.
Contact your dealer to solve the problem.
5.
The machine is
leaking at the door
5.1.
Make sure the door is tightened enough.
5.2.
Replace the door gasket (see para. 10.3 Replacing
the Door Gasket)
6.
Water does not exit
chamber due to
clogged outlet
strainer.
6.1.
Clean strainer according to instructions (see sec
10.5).
If the above recommendations did not correct the malfunction, or if any
problems not discussed in this section were encountered, please contact your
dealer for further assistance. You may also contact the distributor at the
address on the front cover of this manual.
Содержание 2540 ELV
Страница 2: ......
Страница 15: ...Page 13 of 51 OVERALL DIMENSIONS DRAWING FOR 2540 ELV ELVC...
Страница 26: ...Page 24 of 51 4 KEYBOARD Keys and Display Screen Keypad Power On Off Switch...
