Tuttnauer 2540 ELV, Руководство по эксплуатации и техническому обслуживанию

Страница: 36 / 53

Page 34 of 51
6.2 Printer Output
PRINTER OUTPUT DESCRIPTION
Operator: To be filled in manually by operator
Time: 09:17:34 Time sterilization cycle ended
Date: 10/03/2006 Date sterilization cycle ended.
CYCLE ENDED!
085.7 082.9 017.4
E 00:40:03
Status of the autoclave during exhaust stage
Temp. and pressure reading time in HH.MM.SS
122.6 122.6 016.5
C 00:34:51
Status of the autoclave during cooling stage
Temp. and pressure reading time in HH.MM.SS
122.6 122.6 016.5
S 00:35:08
Status of the autoclave during sterilization stage
Temp. and pressure reading time in HH.MM.SS
*
*
*
Prints sterilization data every 60 seconds
121.2 121.1 016.2
S 00:14:51
Status of the autoclave during sterilization stage
Temp. and pressure reading time in HH.MM.SS
108.9 108.9 006.5
H 00:12:29
Status of the autoclave during heating stage
Temp. and pressure reading time in HH.MM.SS
*
*
*
Prints heating data every 3 minutes
023.2 023.0 000.2
H 00:00:29
Status of the autoclave during heating stage
Temp. and pressure reading time in HH.MM.SS
022.7 022.3 000.5
W 00:00:00
Status of the autoclave during water inlet stage
Temp. and pressure reading time in HH.MM.SS
C C psi
Temperature sensor 1
(°C)
Temperature
sensor 2 (°C)
Chamber press.
(psi)
End Temp 090.0min End temperature for selected program.
Dry Time: 000.0min Drying time for selected program (N/A on this unit) .
Ster Time: 020.0min Sterilization time for selected program.
Ster Temp: 121.1°C Sterilization temperature in chamber for selected program
Cycle: Liquid & C Cycle name
Load number: 0017 Cycle counter
Param. Ver: 0031 Version of parameters setting.
Ver: Lab 1.43 Software version.
Ser.Num: 02803304 Autoclave's serial number.
Time: 09:54:56 Time sterilization cycle started.
Date: 18/03/2009 Date sterilization cycle started.
POWER ON The device is turned on
Legend
W Water inlet C Cooling stage
H Heating stage E Exhaust stage
S Sterilization stage D Dry stage