Tuttnauer 2540 ELV, Руководство по эксплуатации и техническому обслуживанию, Страница: 8 / 53

Page 6 of 51
2 TECHNICAL DATA
2.1 Introduction
Models 2540, 3850, 3870, ELV/ELVC are vertical sterilizers designed
especially for sterilization of instruments, liquids and other materials in
laboratories, research institutes, food laboratories and pharmaceutical
facilities.
A special feature of the ELVC sterilizer is the ability is to rapidly cool
down a liquid load at the end of the sterilizing portion of the cycle.
The sterilizer provides four fully automatic programs eliminating any need
for operator intervention during a cycle. A computerized control unit
enables precise control and monitoring of physical parameters and clear
documentation of the sterilization cycles.
A safety valve, mounted at the back top of the autoclave, is set to 40psig
and protects the system from excessive pressure.
The autoclave is equipped with a pressure gauge (for reference only) that
can be used in case there is any problem with the electricity supply during
the sterilization cycle. The pressure gauge can verify if there is pressure in
the chamber before an attempt is made to open the door.
According to the standard for laboratory autoclaves these units are
equipped with two temperature sensors that control the cycle and prevent
the opening of the door if the temperature is too high.
This manual is intended to give the user a general understanding of how
the autoclave works and indicates best ways to operate and maintain it in
order to obtain optimum results and a trouble free operation.
After reading this manual, operating the autoclave should be straight
forward. However, since the autoclave is built using high technology
sensitive components, no attempt should be made by the user or any other
unauthorized person to repair or re-calibrate it.
Only technical personnel having proper qualifications, holding technical
documentation and having adequate test instrumentation, are authorized to
install or undertake repair or service.