Tuttnauer 2540 ELV, Руководство по эксплуатации и техническому обслуживанию, Страница: 37 / 53

Page 35 of 51
6.3 DPU 30 Printer Handling
6.3.1
Setting Paper
1. Press the paper cover open button (#1) and open the paper cover
(#3). Handle the paper cutter carefully not to cut your hand.
2. Set a paper roll as shown in the figure.
3. Close the paper cover (#3) by pressing both ends of the cover
with the tip end of the paper extending out from the cutter.
6.3.2 Maintenance
1. Wipe off any soiling on the Printer's external surface with a soft
cloth and a weak neutral detergent. After that, wipe the printer
with a dry cloth.
2. Caution : Never disassemble the printer. Failure to follow this
instruction may cause electric shock, overheating or burning of
the printer adapter. Or an which may lead to fire.
3. The Printer is sensitive to moisture. Avoid splashing or spilling
liquids on the Printer. Doing so can lead to electric shock or
create a fire hazard.
4. Never touch the thermal head immediately after printing because
it becomes very hot. Make sure that the thermal head is cool
before setting paper or cleaning the thermal head.
5. Power OFF the autoclave in any of the following cases:
•
The printer does not recover from an error.
•
Smoke, strange noise or smells erupt from the printer.
•
A piece of metal or any liquid touches the internal parts or
slot of the printer.
6. Notes on treatment of thermal papers:
•
Store the papers in a dry, cool and dark place.
•
Do not rub the papers with hard substance.
•
Keep the papers away from organic solvent.