background image

General Information

27

Tire Pressure Monitoring System 
(TPMS) Warning Light

(Only on models equipped with TPMS)

The tire pressure warning
light works in conjunction with
the tire pressure monitoring
system (see page

50

).

The warning light will only illuminate
when the front or rear tire pressure is
below the recommended pressure. It will
not illuminate if the tire is over inflated.

When the warning light is illuminated,
the TPMS symbol indicating which is the
deflated tire and its pressure will
automatically be shown in the display
area.

1.

TPMS symbol

2.

Rear tire, identified

3.

Tire pressure

The tire pressure at which the warning
light illuminates is temperature
compensated to 68°F (20°C) but the
numeric pressure display associated
with it is not (see page

52

).  Even  if  the

numeric display seems at or close to the
standard tire pressure when the
warning light is on, a low tire pressure is
indicated and a puncture is the most
likely cause.

1 2

3

Warning

Stop the motorcycle if the tire
pressure warning light illuminates. Do
not ride the motorcycle until the tires
have been checked and the tire
pressures are at their recommended
pressure when cold.

Содержание Speed Triple R





















































































































































Отзывы: