Triumph Speed Triple R, Руководство пользователя

Страница: 64 / 148

General Information
64
Rider’s Seat Installation
To install the rider’s seat, position the
seat’s front bracket under the fuel tank
hinge and the rear location into position
in the rear subframe.
1. Rider’s seat
2. Front bracket
3. Fuel tank hinge
Secure the rider’s seat to the seat lock
plate with the two fasteners.
Tighten to
80 lbf in (9 Nm) .
Note:
• The fuel tank support is located on
the underside of the rider’s seat, see
page
97 .
Seat Care
To prevent damage to the seat or seat
cover, care must be taken not to drop or
lean the seat against any surface which
may damage the seat or its cover.
See page 134 for seat cleaning
information.
Breaking-In
Breaking-in is the name given to the
process that occurs during the first
hours of a new vehicle's operation.
In particular, internal friction in the
engine will be higher when components
are new. Later on, when continued
operation of the engine has ensured
that the components have 'bedded in',
this internal friction will be greatly
reduced.
A period of careful breaking-in will
ensure lower exhaust emissions, and will
optimize performance, fuel economy and
longevity of the engine and other
motorcycle components.
During the first 500 miles
(800 kilometers):
• Do not use full throttle.
• Avoid high engine speeds at all
times.
• Avoid riding at one constant engine
speed, whether fast or slow, for a
long period of time.
• Avoid aggressive starts, stops, and
rapid accelerations, except in an
emergency.
• Do not ride at speeds greater than
3/4 of maximum engine speed.
1
2
3
L0002