Triumph Speed Triple R, Руководство пользователя

Страница: 66 / 148

General Information
66
Check:
Fuel: Adequate supply in tank, no fuel
leaks (see page 58 ).
Engine Oil: Correct level on dipstick. Add
correct specification oil as required. No
leaks from the engine or oil cooler (see
page
91 ).
Drive Chain: Correct adjustment (see
page 100 ).
Tires/Wheels: Correct inflation pressures
(when cold). Tread depth/wear, tire/wheel
damage, punctures etc. (see page
118 ).
Nuts, Bolts, Fasteners: Visually check
that steering and suspension compo-
nents, axles, and all controls are
properly tightened or fastened. Inspect
all areas for loose/damaged fasteners.
Steering Action: Smooth but not loose
from lock to lock. No binding of any of
the control cables (see page
109 ).
Brakes: Pull the brake lever and push the
brake pedal to check for correct
resistance. Investigate any lever/pedal
where the travel is excessive before
meeting resistance, or if either control
feels spongy in operation (see page
104 ).
Brake Pads: There should be more than
0.04 in (1.0 mm) of friction material
remaining on the front brake pads and
more than 0.06 in (1.5 mm) for the rear
(see page
104 ).
Brake Fluid Levels: No brake fluid
leakage. Brake fluid levels must be
between the MAX and MIN marks on
both reservoirs (see page
105 ).
Front Forks: Smooth action. No leaks
from fork seals (see page 110 ).
Throttle: Throttle grip free play
0.08 - 0.12 in (2 - 3 mm) at all steering
angles. Make sure that the throttle grip
returns to the idle position without
sticking (see page
98 ).
Clutch: Smooth operation and correct
cable free play (see page 99 ) at all
steering angles.
Coolant: No coolant leakage. Check the
coolant level in the expansion tank
(when the engine is cold) (see page
94 ).
Electrical Equipment: All lights and horn
function correctly (see page 53 ).
Engine Stop: Stop switch turns the
engine off (see page 68 ).
Stand: Returns to the fully up position
by spring tension. Return springs not
weak or damaged (see page
61 ).