Triumph Speed Triple R, Руководство пользователя

Страница: 63 / 148

General Information
63
Passenger Seat Removal
To remove the passenger seat, insert the
ignition key into the seat lock and turn it
counterclockwise while pressing down
on the front part of the passenger seat.
This will release the seat from its lock.
Lift the front of the seat and slide
forwards for complete removal from the
motorcycle.
Passenger Seat Installation
Note:
• The rider’s seat must be correctly
installed before attempting to install
the passenger seat.
To install the passenger seat, position
the rear of the passenger seat to the
rear locator in the rear subframe.
1. Passenger seat
2. Rear locator
3. Seat lock hook
Locate the seat lock hook into the lock
plate assembly and press down to
engage it in the lock. An audible click can
be heard when the seat is correctly
engaged in the lock.
Rider’s Seat Removal
Remove the passenger seat as described
on page
63 . A tool is located at the front
of the passenger seat. Using the tool,
remove the two fasteners securing the
rider’s seat to the lock plate.
1. Fasteners
2. Rider’s seat
To detach the rider’s seat, slide the seat
rearwards and lift the rear of the seat.
Disengage the locators from the frame,
and the front bracket from below the
fuel tank hinge.
1
2 3
L0003
Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly
upwards. If the seat is not correctly
secured in the lock, it will detach from
the lock. A loose or detached seat
could cause loss of motorcycle control
and an accident.
2
1
L0001
1