Triumph Speed Triple R, Руководство пользователя

Страница: 41 / 148

General Information
41
Note:
• It is not possible to select the RIDER
mode while the motorcycle is in
motion if ABS and/or TTC are set to
Off when setting the RIDER mode
options (see page
43 ).
Press and release the MODE button on
the left handlebar switch housing until
the desired riding mode is flashing in the
display.
1. Selected riding mode (flashing)
2. Current (active) riding mode
The selected riding mode is
automatically activated if within
30 seconds of pressing the MODE button
the following has been carried out
simultaneously:
• Close the throttle
• Pull the clutch in
• Ensure that the brakes are not
engaged (allow the motorcycle to
coast).
Once the MAP, ABS and TTC settings
have changed, the selected riding mode
will be displayed and the previous mode
will no longer be shown.
1. Selected riding mode
Resume riding as normal.
Note:
• If any one of the systems (MAP, ABS
or TTC) fails to change to the
settings specified by the selected
riding mode, both the previous and
the selected riding mode icons will
flash.
1. Incomplete mode change (flashing)
2 1
1
1