Triumph Speed Triple R, Руководство пользователя

Страница: 132 / 148

Maintenance and Adjustment
132
License Plate Light
Bulb Replacement
Release the three fasteners and remove
the front panel from the fuel tank.
1. Front panel
2. Fasteners
Disconnect the battery, negative (black)
lead first.
1. Fastener
2. License plate bracket
Release the fastening and detach the
light from the license plate bracket. It is
not necessary to disconnect the license
plate electrical connectors.
Carefully remove the bulb holder from
the back of the license plate light unit.
Remove the bulb.
1. License plate light
2. Bulb holder
Installation is the reverse of the removal
procedure, noting the following:
Tighten the lamp fastening to 18 lbf in
(2 Nm) .
Reconnect the battery, positive (red)
lead first.
Re-install the front panel and tighten
the side fasteners to
18 lbf in (2 Nm) .
cg fo
2
1
2
2
cjgn
1 2
Caution
To avoid cable damage, do not pull the
bulb holder using the cables. Pull only
on the bulb holder.
1
cg f k
2