Triumph Speed Triple R, Руководство пользователя

Страница: 58 / 148

General Information
58
High Beam Button
When the high beam button is pressed
the high beam will be switched on. Each
press of the button will swap between
dip and high beam.
Note:
• If daytime running lights are
mounted to the motorcycle, the high
beam button has additional
functionality.
If the DRL switch is in the daytime
running lights position, then press and
hold the high beam button to turn the
high beam on. It will remain on as long as
the button is held in and will turn off as
soon as the button is released.
Note:
• A lighting on/off switch is not
installed to this model. The position
light, brake/tail light and license
plate light all function automatically
when the ignition is turned to the ON
position.
• The headlight will function when the
ignition switch is turned to the ON
position.
• The headlight will go off while
pressing the starter button until the
engine starts.
Fuel Requirement/Refueling
Fuel Grade
Your Triumph engine is designed to use
unleaded fuel and will give optimum
performance if the correct grade of fuel
is used. Always use unleaded fuel with
an octane rating of AKI octane rating
(R+M)/2 of 89 or higher. Federal
regulations require that pumps
delivering unleaded gasoline are marked
'UNLEADED' and that the Cost of Living
Council (CLC) or Anti-Knock Index (AKI)
octane rating is also displayed. These
ratings are an average of the Research
Octane Number (RON) and the Motor
Octane Number (MON).
Note:
• If 'knocking' or 'pinging' occurs at a
steady engine speed under normal
load, use a different brand of
gasoline or gasoline which has a
higher octane rating.
Caution
The use of leaded gasoline is illegal in
some countries, states or territories.
Check local regulations before using
leaded gasoline.
Pb