Triumph Speed Triple R, Руководство пользователя

Страница: 50 / 148

General Information
50
Tire Pressure Monitoring
System (TPMS)
(Only on models equipped with TPMS)
Function
Tire pressure sensors are installed to
the front and rear wheels. These
sensors measure the air pressure inside
the tire and transmit pressure data to
the instruments. These sensors will not
transmit the data until the motorcycle is
traveling at a speed greater than 12 mph
(20 km). Two dashes will be shown in the
display area until the tire pressure
signal is received.
The Tire Pressure Monitoring System
(TPMS) is an accessory installed item
and must be installed by your
authorized Triumph dealer.
The TPMS display on the instrument
pack will only be activated when the
system has been installed.
An adhesive label will be mounted to the
wheel rim to indicate the position of the
tire pressure sensor which is near the
valve.
Tire Pressure Sensor Serial Number
The serial number for each tire pressure
sensor is printed on a label attached to
the sensor. This number may be
required by the dealer for service or
diagnostics.
If the TPMS has been installed at the
factory, labels identifying the front and
rear sensor serial numbers will be
affixed to the spaces below.
If the TPMS is being installed to the
motorcycle as an accessory, make sure
that the dealer records the serial
numbers of the front and rear tire
pressure sensors in the spaces provided
below.
Front Tire Pressure Sensor
Rear Tire Pressure Sensor
Warning
The daily check of tire pressures must
not be excluded because of the
installation of the TPMS. Check the tire
pressure when the tires are cold and
using an accurate tire pressure gauge
(see page
118 ).
Use of the TPMS system to set
inflation pressures may lead to
incorrect tire pressures leading to loss
of motorcycle control and an accident.