Triumph Speed Triple R, Руководство пользователя

Страница: 34 / 148

General Information
34
Setting Gear Shift Light Limits
The gear shift lights will not operate
below 3,500 rpm to avoid the lights
operating at idle.
To change the gear shift light modes,
with the motorcycle stationary and in
neutral turn the ignition to the ON
position.
Press and release button 'A' until SET-UP
is shown in the display screen then
press button 'B'.
Press and release button 'A' until SHIFt
is shown then press button 'B'. The
current mode will be displayed and the
corresponding gear shift lights will
illuminate.
Press and release button 'A' until the
desired gear shift light mode is shown
then press button 'B'. The display will
scroll through in the following order:
• 6 (6 LED mode);
• 3 (3 LED mode);
• SE (Sequential mode);
• OFF (Gear shift lights off).
Note:
• The motorcycle is delivered from the
factory with the gear shift light set
to the 6 LED mode at 3,500 rpm.
1. Gear shift lights
2. Display screen (6 mode shown)
3. Button A
4. Button B
When the gear shift light mode has been
selected, the tachometer needle will
move round to the last set position. The
rpm will be shown in the display screen
with the 1,000 units flashing.
1. RPM 1,000 units
2. Button A
3. Button B
TC
TC
1
4
2
3
TC
TC
2
3 1