Triumph Speed Triple R, Руководство пользователя

Страница: 129 / 148

Maintenance and Adjustment
129
Headlight Adjustment - Vertical
1. Bolts
2. Front subframe alignment marks
3. Headlight bracket
The vertical beams of the left and right
hand headlights can only be adjusted
together. Independent adjustment is not
possible.
Switch the headlight dipped beam on.
Loosen the two bolts securing the
headlight bracket to the front subframe
sufficiently to allow restricted movement
of the headlights.
Using the headlight bracket mark and
the alignment markings on the front
subframe, adjust the position of the
headlights to give the required beam
setting. Each mark on the subframe
represents 1°.
Moving the bracket forwards moves the
headlight downwards. Moving the
bracket rearwards moves the headlights
upwards.
Tighten the headlight bracket bolts to
62 lbf in (7 Nm) .
Recheck the headlight beam settings.
Switch the headlights off when the beam
settings are satisfactorily set.
Headlight Bulb Replacement
Loosen the three fasteners and remove
the front panel from the fuel tank.
1. Front panel
2. Fasteners
Disconnect the battery, negative (black)
lead first.
L0037
1
2
3
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulbs to cool before handling.
Avoid touching the glass part of the
bulb. If the glass is touched or gets
dirty, clean with alcohol before re-use.
Caution
The use of non-approved headlight
bulbs may result in damage to the
headlight lens.
Use a genuine Triumph supplied
headlight bulb as specified in the
Triumph Parts Catalog.
Always have replacement headlight
bulbs installed by an authorized
Triumph dealer.
cg fo
2
1
2
2