Trine 4100 Electric Strike, Руководство по установке

Страница: 50 / 65

-
-
MODEL 206-2 Motion Alert & Annunciator
Operating Instruction
(1)
(4)
(5)
(2)
(3)
GOOD BAD
1440 Ferris Place, Bronx, NY 10461
PH: 718-829-2332 FAX: 718-829-6405
customerservice@trineonline.com
www.trineonline.com
REMARKS:
This unit will self-activate when the battery becomes weak; when there are any
abnormal functions from the unit, first check the batteries and replace with new ones.
Batteries should be removed during long periods of disuse to avoid possible leakage.
PARTS NAME AND FUNCTION
1. Sensor
2. Volume Switch. Off, Low, High
3. Three Setting Tone Control. Position: 1 - 8 note melody
2 - 2 repeated tones
3 - 2 alternating tones
4. Hanging hole, for wall mounting
5. Battery compartment
BATTERY INSTALLATION
This unit operates on 3VDC, batteries using 2 pieces UM-2, size "C" 1.5V
(R14) batteries or equivalent. Press and slide out the battery door, insert
batteries into the battery compartment with correct polarity as indicated,
wrong polarity may damage unit.
06/02 REV B
LOCATION OF UNIT
Face the sensor parallel to person's walking direction, stable lighting condition
required, not suitable for flashing or too dim light condition. Do not face the
sensor towards any moving or vibrating object, otherwise the unit will be mis-
triggered.
OPERATION
You can place the unit on table or hang it on wall. Slide the Power Switch to
the "LOW" or "HIGH" position, melody will sound instantly and then it will stop.
When someone passes the sending area, the unit will activate the melody or
tones automatically and then stop.