TRENDnet User’s Guide
TV‐IP328PI
© Copyright TRENDnet. All Rights Reserved.
5
Warnings
Serious injury or death may be caused if any of these warnings are neglected
.
Follow these safety guards to prevent serious injury or death
.
•
If using the power adapter, please choose the power adapter that
meets the safety extra low voltage (SELV) standard or IEC60950‐1 and
Limited Power Source standard
.
•
If the product does not work properly, please contact your dealer or
the nearest service center. Never attempt to disassemble the camera
yourself. Disassembling the product will void the warranty and may
cause harm or injury
.
•
To reduce the risk of fire or electrical shock, do not expose this product
to rain or water
.
•
The installation should be done by a qualified service person and
should conform to all construction and electric regulations and other
local codes.
Cautions
Injury or equipment damage may be caused if any of these cautions are
neglected. Follow these precautions to prevent potential injury or material
damage.
•
Make sure the power supply voltage is correct before using the Camera
.
•
Do not drop the camera or subject to physical shock.
•
Do not touch sensor modules with fingers. If cleaning is necessary, use
a clean cloth with a bit of ethanol and wipe it gently. If the camera will
not be used for an extended period of time, put on the lens cap to
protect the sensor from dirt.
•
Do not aim the camera lens at the strong light such as the Sun or an
incandescent lamp. Strong light can damage the camera sensor.
•
The sensor may be burned out by a laser beam, so when any laser
equipment is being used, make sure that the surface of the sensor will
not be exposed to the laser beam.
•
Do not place the camera in extremely hot, cold temperatures (the
operating temperature should be between ‐10°C to 60°C), dusty or
damp environment, and do not expose it to high electromagnetic
radiation.
•
To avoid heat accumulation, good ventilation is required for a proper
operating environment.
•
Keep out of water and any liquid.
•
While shipping, the camera should be packed in its original packing.
