TRENDnet User’s Guide
TV‐IP328PI
© Copyright TRENDnet. All Rights Reserved.
11
Time Settings
1.
Select the Time Zone of your location from the drop‐down menu.
2.
Configure the NTP settings.
(1)
Click to enable the
NTP
function.
(2)
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions
with NTP server.
(3)
(Optional) You can click the
Test
button to test the time
synchronization function via NTP server.
Note
:
If the camera is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44). If the camera is set in a
customized network, NTP software can be used to establish a NTP server for
time synchronization.
Configure the manual time synchronization.
(1)
Check the
Manual Time Sync.
to enable the manual time
synchronization function.
(2)
Click the icon
to select the date, time from the pop‐up calendar.
(3)
(Optional) You can check
Sync. with computer time
item to
synchronize the time of the device with that of the local PC.
Click
Save
to save the settings.
