TRENDnet User’s Guide
TV‐IP328PI
© Copyright TRENDnet. All Rights Reserved.
37
For your privacy and to better protect your system against security
risks, we strongly recommend the use of strong passwords for all
functions and network devices. The password should be something
of your own choosing (using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower
case letters, numbers and special characters) in order to increase
the security of your product.
Proper configuration of all passwords and other security settings is
the responsibility of the installer and/or end‐user.
The
Receiver
table
:
Select the receiver to which the email is sent. Up to
3 receivers can be configured.
Receiver:
The name of the user to be notified.
Receiver’s Address
: The email address of user to be notified.
4.
Click
Save
to save the settings.
Storage – Schedule Settings
Record Schedule
Steps:
1.
Check the checkbox of
Enable
to enable scheduled recording.
2.
Click
Advanced
to set the camera record parameters.
Pre‐record: The time you set to start recording before the scheduled
time or the event. For example, if an alarm triggers recording at 10:00,
and the pre‐record time is set as 5 seconds, the camera starts to
record at 9:59:55.
The Pre‐record time can be configured as No Pre‐record, 5s, 10s, 15s,
20s, 25s, 30s or not limited.
Post‐record: The time you set to stop recording after the scheduled
