TRENDnet User’s Guide
TV‐IP328PI
© Copyright TRENDnet. All Rights Reserved.
34
exact time period.
3.
(Optional) Click Delete to delete the current arming schedule, or click
Save to save the settings.
4.
Move the mouse to the end of each day, a copy dialogue box pops up,
and you can copy the current settings to other days.
5.
Click
Save
to save the settings.
Note:
The time of each period can’t be overlapped. Up to 8 periods can be
configured for each day.
Task 3: Set the Linkage Method for Motion Detection
Check the checkbox to select the linkage method. Audible Warning, Send
Email, Notify Surveillance Center, Upload to FTP/Memory Card/NAS, Trigger
Channel and Trigger Alarm Output are selectable. You can specify the linkage
method when an event occurs.
Note:
The linkage methods vary according to the different camera
models.
Send Email
Send an email with alarm information to a user or users when an event
occurs.
Notify Surveillance Center
Send an exception or alarm signal to remote management software
when an event occurs.
Upload to FTP/ NAS
Capture the image when an alarm is triggered and upload the picture to
a FTP server.
Notes:
●
Set the FTP address and the remote FTP server first
●
Go to
Configuration > Storage > Schedule Settings> Capture >
Capture Parameters
page, enable the event‐triggered snapshot,
and set the capture interval and capture number.
●
The captured image can also be uploaded to the available SD card
or network disk.
