TRENDnet TV-IP328PI Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 47

background image

TRENDnet User’s Guide

TV‐IP328PI

© Copyright TRENDnet. All Rights Reserved.

44

Regulations

Federal Communication Commission Interference Statement

This equipment has been  tested and found to comply with  the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the
instructions,  may  cause  harmful  interference  to  radio  communications.
However, there is no guarantee that interference will not occur in a particular
installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of
the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected

.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment

.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body

.

This transmitter must not be co‐located or operating in conjunction with any
other antenna or transmitter.

The availability of some specific channels and/or operational frequency
bands are country dependent and are firmware programmed at the factory
to match the intended destination. The firmware setting is not accessible by
the end user

.

RoHS

This product is RoHS compliant.

«
...
42
43
44
45
46
...
»

Содержание TV-IP328PI
















































Отзывы:

Нет отзывов

Похожие инструкции для TV-IP328PI

Бренд: D-Link Страницы: 24

DCS-3110 - SECURICAM Fixed Network Camera

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 18

Бренд: Watec Страницы: 63

Бренд: i-PRO Страницы: 2

Бренд: hager Страницы: 2

Бренд: Conbrov Страницы: 36

Бренд: Eneo Страницы: 90

Бренд: i-onyx Страницы: 34

Бренд: hager Страницы: 2

Бренд: Federal Signal Corporation Страницы: 12

Бренд: NorthQ Страницы: 11

Бренд: RUD Страницы: 6

IQeye Sentinel Series IQ802

Бренд: Iqinvision Страницы: 2

Бренд: Lilin Страницы: 111

Бренд: Monitor Страницы: 14

Бренд: TP-Link Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды