Time-Range:
Select the time-range for the rule to take effect.
S-Condition:
Select S-Condition to limit the transmission rate of the data packets.
Rate:
The transmission rate of the data packets. Valid values are (1 to
1000000) in Kbps.
Qos Remark:
Select QoS Remark to forward the data packets based on the QoS
settings.
S-Mirror:
Select S-Mirror to mirror the data packets to the specific port.
Redirect:
Select Redirect to change the forwarding direction of the data
packets.
Port:
Redirect or mirror the data packets to the specific port.
13.2.4
Standard-IP ACL
Standard-IP ACLs analyze and process data packets based on a series of match conditions,
which can be the source IP addresses and destination IP addresses carried in the packets.
Choose the menu
ACL
→
ACL Config
→
Standard-IP ACL
to load the following page.
Figure 13-5 Create Standard-IP Rule
Configuration Procedure
1)
Select an ACL ID from the drop-down list, enter a Rule ID, then specify the operation of the
rule.
2)
Select and define the rule's packet-matching criteria.
Entry Description
ACL ID:
Select a Standard-IP ACL from the drop-down list.
Rule ID:
Enter an ID number that is used to identify the rule. It cannot be the
same as the existing Standard-IP Rule IDs.
327
Содержание T3700G-28TQ
Страница 1: ...User Guide T3700G 28TQ T3700G 52TQ 1910012358 REV3 0 0 November 2018...
Страница 11: ...XI...
