TP-Link T3700G-28TQ, Руководство пользователя

Страница: 386 / 430

Note:
The default MIB View of SNMP Community is Default.
Configuration Procedure:

If SNMPv3 is employed, please take the following steps:
Step Operation Description
1 Create SNMP View. Required. On the SNMP → SNMP Config →SNMP
View page, create SNMP View of the management
agent. The default View Name is Default and the
default OID is 1.
2 Create SNMP Group. Required. On the SNMP → SNMP Config →SNMP
Group page, create SNMP Group for SNMPv3 and
specify SNMP Views with various access levels for
SNMP Group.
3 Create SNMP User. Required. On the SNMP → SNMP Config →SNMP
User page, create SNMP User in the Group and
configure the auth/privacy mode and auth/privacy
password for the User.

If SNMPv1 or SNMPv2c is employed, please take the following steps:
Step Operation Description
1 Create SNMP View. Required. On the SNMP → SNMP Config →SNMP
View page, create SNMP View of the management
agent. The default View Name is viewDefault and the
default OID is 1.
2
Configure
access level
for the User.
Create SNMP
Community
directly. Required alternatively.

Create SNMP Community directly.
On the
SNMP → SNMP Config →SNMP
Community page, create SNMP Community
based on SNMP v1 and SNMP v2c.

Create SNMP Group and SNMP User.
Similar to the configuration way based on
SNMPv3, you can create SNMP Group and
SNMP User of SNMP v1/v2c. The User name
can limit access to the SNMP agent from
SNMP network management station,
functioning as a community name. The users
can manage the device via the Read View,
Write View and Notify View defined in the
SNMP Group.
Create SNMP
Group and SNMP
User.
375