TP-Link T3700G-28TQ, Руководство пользователя

Страница: 284 / 430

Choose the menu Multicast Routing →PIM DM→PIM DM neighbor to load the following page.
Figure 11-12 PIM DM neighbor
The following entries are displayed on this screen:

Search Option
The L3 interfaces can be configured as PIM DM mode by this page.
Search Option:

ALL : Displays all entries.

Neighbor : Select Neighbor and enter the neighbor
address of your desired entry.

Interface
：
Select interface and enter the interface ID of
your desired entry.

PIM DM Neighbor
Interface: The physical interface on which PIM DM is enabled.
Neighbor: The IP address of the PIM neighbor for which this entry
contains information.
Uptime: The time since the PIM neighbor (last) became a neighbor of
the local switch.
Expires: The time remaining before the PIM neighbor will be aged out.
Configuration Procedure for PIM DM:
Step Operation Description
1 Configure
interface Required. Configure IP addresses and subnet masks of routing
interfaces on
Routing→Interface→Interface Config page.
2 Configure routing
protocol Required. Configure the routing entries via static route or
dynamic routing protocol like OSPF, and make sure all network
can communicate with each other and update the routing
information through a unicast routing protocol dynamically.
3 Enable multicast
routing and PIM
DM Required. Enable multicast routing on Multicast Routing→Global
Config page. Enable PIM DM on routing interfaces on Multicast
Routing→PIM DM→PIM DM Interface page.
273