Deny: Only deny the IP address within the IP range and
permit others.
Add IP-range
Start IP:
Enter the start IP address of the IP range.
End IP:
Enter the end IP address of the IP range.
IP-range Table
Select:
Select to delete the IP range entry.
Index:
Displays the index of the IP range.
Start IP:
Displays the start IP address of the IP range.
End IP:
Displays the end IP address of the IP range.
9.3
MVR
Multicast VLAN Registration (MVR) allows a single multicast VLAN to be shared for multicast
member ports in different VLANs. In IGMP snooping, if member ports are in different VLANs, a
copy of the multicast streams is sent to each VLAN that has member ports. While MVR
provides a dedicated multicast VLAN to forward multicast traffic over the layer 2 network, to
avoid duplication of multicast streams for clients in different VLANs. Clients can dynamically
join or leave the multicast VLAN without interfering with their relationships in other VLANs.
Only one MVR multicast VLAN per switch or per stack is supported.
9.3.1
MVR Config
Use this page to view and configure the global settings for Multicast VLAN Registration (MVR).
Choose the menu
Multicast
→
MVR
→M
VR Config
to load the following page.
Figure 9-16 MVR Global Config
151
Содержание T3700G-28TQ
Страница 1: ...User Guide T3700G 28TQ T3700G 52TQ 1910012358 REV3 0 0 November 2018...
Страница 11: ...XI...
