Entry Description:
SNMP Traps
Multiple User:
Generates a trap when the same user ID is logged into the
switch more than once at the same time.
CPU Thresholds:
Generates a trap when the CPU utilization is over 80%.
Spanning Tree:
Generates a trap when the status of STP changes.
Link Status:
Generates a trap when the up/down status of an interface
changes.
Storm Control:
Generates a trap when the multicast or broadcast rate
exceeds the predefined value.
Mbuf Thresholds
Generates a trap when the memory utilization is over 80%.
Mac Lock
Violation:
Generates a trap when a packet with a disallowed MAC
address is received on a locked port.
Dot1q:
Generates a trap when creating or deleting a VLAN.
Inventory:
Generates a trap for Inventory.
Vrrp:
Generates a trap for Virtual Routing Redundancy Protocol
(VRRP) changes.
Pim:
Generates a trap for Protocol-Independent Multicast (PIM)
changes.
Fan:
Generates a trap for fan.
Power:
Generates a trap for power.
Temperature:
Generates a trap for temperature.
OSPF Traps
Virt If State
Change:
Generates a trap when virtual interface state changes.
Nbr State
Change:
Generates a trap when non-virtual neighbour state changes.
Virt Nbr State
Change:
Generates a trap when virtual neighbour state changes.
If Config Error:
Generates a trap when configure mismatch errors occur on
non-virtual interfaces.
Virt Config Error:
Generates a trap when configure mismatch errors occur on
virtual interfaces.
380
Содержание T3700G-28TQ
Страница 1: ...User Guide T3700G 28TQ T3700G 52TQ 1910012358 REV3 0 0 November 2018...
Страница 11: ...XI...
