TP-Link T3700G-28TQ, Руководство пользователя

Страница: 139 / 430

Step Operation Description
5 Configure switch C as
the designated bridge of
Instance 1 On Spanning Tree →MSTP Instance→Instance Config page,
configure the priority of Instance 1 to be 4096.
6 Configure switch C as
the root bridge of
Instance 2 On Spanning Tree →MSTP Instance→Instance Config page,
configure the priority of Switch C in Instance 2 as 0.

Configure switch D:
Step Operation Description
1 Configure ports On VLAN →802.1Q VLAN page, configure the link type of the
related ports as Trunk, and add the ports to
VLAN101-VLAN106. The detailed instructions can be found
in the section
802.1Q VLAN .
2 Enable STP function On Spanning Tree →STP Config→STP Config page, enable
STP function and select MSTP version.
On
Spanning Tree →Port Config→Port Config page, enable
MSTP function for the port.
3 Configure the region
name and the revision of
MST region On Spanning Tree →MSTP Instance→Region Config page,
configure the region as TP-Link and keep the default revision
setting.
4 Configure
VLAN-Instance mapping
table of the MST region On Spanning Tree →MSTP Instance→Instance C onfig page,
configure VLAN-Instance mapping table. Map VLAN 101,
103 and 105 to Instance 1; map VLAN 102, 104 and 106 to
Instance 2.

The configuration procedure for switch E and F is the same with that for switch D.

The topology diagram of the two instances after the topology is stable

For Instance 1 (VLAN 101, 103 and 105), the red paths in the following figure are connected
links; the gray paths are the blocked links.
128