9.2.2
Port Config
On this page you can configure MLD Snooping function with each single port.
Choose the menu
Multicast
→
MLD Snooping
→
Port Config
to load the following page.
Figure 9-11 Port Config
The following entries are displayed on this screen:
Port Config
UNIT:1/LAGS
Click
1
to configure the physical ports. Click
LAGS
to
configure the link aggregation groups.
Select:
Select the port you want to configure.
Port:
Displays the port number.
MLD Snooping:
Select Enable/Disable MLD Snooping for the desired port.
Fast Leave:
Select Enable/Disable Fast Leave feature for the desired port.
If Fast Leave is enabled for a port, the switch will immediately
remove this port from the multicast group upon receiving
MLD done messages.
Member Port Time:
Member ports are ports connected to multicast group
members on the switch. A port is considered to be a member
port when it is added to a multicast group. The member port
ages if the switch does not receive MLD membership report
message from the member port within the member port time.
The switch will no longer consider this port as a member port
and delete it from the multicast forwarding table. The valid
values are from 60 to 600 seconds.
Router Port Time:
Router ports are ports connected to Layer 3 devices on the
switch. The router port ages if the switch does not receive
IGMP query message from the router port within the router
145
Содержание T3700G-28TQ
Страница 1: ...User Guide T3700G 28TQ T3700G 52TQ 1910012358 REV3 0 0 November 2018...
Страница 11: ...XI...
