User Guide
70
Managing System
PoE Configurations (Only for Certain Devices)
6.2 Using the CLI
6.2.1 Configuring the PoE Parameters Manually
Follow these steps to configure the basic PoE parameters:
Step 1
configure
Enter global configuration mode.
Step 2
power inline consumption
power-limit
Specify the maximum power the PoE switch can supply globally.
power-limit
: Specify the maximum power the PoE switch can supply.
For T1500-28PCT, the valid value ranges from 1 to 192 W. By default, the value is 192.
For TL-SG2210MP, the valid value ranges from 1 to 150 W. By default, the value is 150.
For TL-SG2210P, the valid value ranges from 1 to 58 W. By default, the value is 58.
Step 3
interface {
fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
}
Enter Interface Configuration mode.
port
: Specify the Ethernet port number, for example 1/0/1.
port-list:
Specify the list of Ethernet ports, for example 1/0/1-3, 1/0/5.
Step 4
power inline supply {
enable
|
disable
}
Specify the PoE status for the corresponding port.
enable
|
disable
: Enable or disable the PoE function. By default, it is enable.
Step 5
power inline priority {
low
|
middle
|
high
}
Specify the PoE priority for the corresponding port.
low
|
middle
|
high
: Select the priority level for the corresponding port. When the supply power
exceeds the system power limit, the switch will power off PDs on low-priority ports to ensure
stable running of other PDs. The default setting is low.
Step 6
power inline consumption {
power-limit
|
auto
|
class1
|
class2
|
class3
|
class4
}
Specify the maximum power the corresponding port can supply.
power-limit | auto | class1 | class2 | class3 | class4
: Select or enter the maximum power the
corresponding port can supply. The following options are provided: Auto represents that
the switch will allocate the maximum power that the port can supply automatically. Class1
represents 4 W, Class2 represents 7 W, Class3 represents 15.4 W and Class4 represents 30 W,
or you can enter a value manually. The value ranges from 1 to 300. It is in the unit of 0.1 watt.
For instance, if you want to configure the maximum power as 5 W, you should enter 50. By
default, it is Class4.
Step 7
time-range
name
Specify a time range for the port. Then the port will supply power only during the time range.
For how to create a time range, refer to
.
name:
Specify the name of the time range.
Downloaded from
