Mirroring Traffic
Mirroring
User Guide
739
Figure 1-2
Configure the Mirroring Session
Follow these steps to configure the mirroring session:
1) In the
Destination Port Config
section, specify a destination port for the mirroring
session, and click
Apply
.
2) In the
Source Interfaces Config
section, specify the source interfaces and click
Apply
.
Traffic passing through the source interfaces will be mirrored to the destination port.
There are three source interface types: port, LAG, and CPU. Choose one or more types
according to your need.
UNIT1
Select the desired ports as the source interfaces. The switch will send a copy of
traffic passing through the port to the destination port.
LAGS
Select the desired LAGs as the source interfaces. The switch will send a copy of
traffic passing through the LAG members to the destination port.
CPU
When selected, the switch will send a copy of traffic passing through the CPU to
the destination port.
Ingress
With this option enabled, the packets received by the corresponding interface
(port, LAG or CPU) will be copied to the destination port. By default, it is disabled.
Egress
With this option enabled, the packets sent by the corresponding interface (port,
LAG or CPU) will be copied to the destination port. By default, it is disabled.
Downloaded from
