User Guide
98
Managing Physical Interfaces
Port Isolation Configurations
Figure 3-2
Port Isolation
Follow these steps to configure Port Isolation:
1) In the
Port
section, select one or multiple ports to be isolated.
2) In the
Forwarding Port List
section, select the forwarding ports or LAGs which the
isolated ports can only communicate with. It is multi-optional.
3) Click
Apply
.
3.2 Using the CLI
Follow these steps to configure Port Isolation:
Step 1
configure
Enter global configuration mode.
Step 2
interface { fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| ten-range gigabitEthernet
port-list
|
port-channel
port-channel
| range port-channel
port-channel-list
|}
Specify the port to be isolated and enter interface configuration mode.
Downloaded from
