Managing System
System Info Configurations
User Guide
39
Use the following command to set the Daylight Saving Time in date mode:
system-time dst date {
smonth
} {
sday
} {
stime
} {
syear
} {
emonth
} {
eday
} {
etime
} {
eyear
} [
offset
]
Specify the Daylight Saving Time in Date mode.
smonth
: Enter the start month of Daylight Saving Time. There are 12 values showing as follows:
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
sday
: Enter the start day of Daylight Saving Time, which ranges from 1 to 31.
stime
: Enter the start time of Daylight Saving Time,in the format of HH:MM.
syear
: Enter the start year of Daylight Saving Time.
emonth
: Enter the end month of Daylight Saving Time. There are 12 values showing as follows:
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
eday
: Enter the end day of Daylight Saving Time, which ranges from 1 to 31.
etime
: Enter the end time of Daylight Saving Time,in the format of HH:MM.
eyear
: Enter the end year of Daylight Saving Time.
offset
: Enter the offset of Daylight Saving Time. The default value is 60.
Step 3
show system-time dst
Verify the DST information of the switch.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the Daylight Saving Time by Date Mode. Set the
start time as 01:00 August 1st, 2017, set the end time as 01:00 September 1st,2017 and
set the offset as 50.
Switch#configure
Switch(config)#system-time dst date
Aug 1 01:00 2017 Sep 1 01:00 2017 50
Switch(config)#show system-time dst
DST starts at 01:00:00 on Aug 1 2017
DST ends at 01:00:00 on Sep 1 2017
DST offset is 50 minutes
DST configuration is one-off
Switch(config)#end
Switch#copy running-config startup-config
Downloaded from
