Configuring LAG
Configuration Example
User Guide
123
3.3 Using the GUI
The configurations of Switch A and Switch B are similar. The following introductions take
Switch A as an example.
1) Choose the menu
L2 FEATURES > Switching > LAG > LAG Table
to load the following
page. Select the hash algorithm as ‘SRC MAC+DST MAC’.
Figure 3-2
Global Configuration
2) Choose the menu
L2 FEATURES > Switching > LAG > LACP Config
to load the
following page. In the
Global Config
section, specify the system priority of Switch A
as
0
and Click
Apply
. Remember to ensure that the system priority value of Switch B is
bigger than 0.
Figure 3-3
System Priority Configuration
3) In the
LACP Table
section, select ports 1/0/1-10, and respectively set the status, group
ID, port priority and mode for each port as follows.
Figure 3-4
LACP Configuration
4) Click
to save the settings.
Downloaded from
