User Guide
144
Configuring 802.1Q VLAN
802.1Q VLAN Configuration
VLAN Name Status Ports
------- -------- --------- ---------
2 RD active
Switch(config-vlan)#end
Switch#copy running-config startup-config
2.2.2 Adding the Port to the Specified VLAN
Follow these steps to add the port to the specified VLAN:
Step 1
configure
Enter global configuration mode.
Step 2
interface {fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
|
port-channel
port-channel-id
| range port-channel
port-channel-list
}
Enter interface configuration mode.
Step 3
switchport general allowed vlan
vlan-list
{
tagged
|
untagged
}
Add ports to the specified VLAN.
vlan-list:
Specify the ID or ID list of the VLAN(s) that the port will be added to. The ID ranges
from 1 to 4094.
tagged
|
untagged
: Select the egress rule for the port.
Step 4
show interface switchport
[fastEthernet
port
| gigabitEthernet
port
| ten-gigabitEthernet
port
| port-channel
lag-id
]
Verify the information of the port.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to add the port 1/0/5 to VLAN 2, and specify its egress
rule as tagged:
Switch#configure
Switch(config)#interface gigabitEthernet
1/0/5
Switch(config-if)#switchport general allowed vlan
2 tagged
Switch(config-if)#show interface switchport gigabitEthernet
1/0/5
Port Gi1/0/5:
PVID: 2
Downloaded from
