User Guide
704
Configuring DHCP Filter
DHCPv6 Filter Configuration
Status
Enable or disable DHCPv6 Filter feature on the port.
Rate Limit
Select to enable the rate limit feature and specify the maximum number of
DHCPv6 packets that can be forwarded on the port per second. The excessive
DHCPv6 packets will be discarded.
Decline Protect
Select to enable the decline protect feature and specify the maximum number
of DHCPv6 Decline packets that can be forwarded on the port per second. The
excessive DHCPv6 Decline packets will be discarded.
LAG
Displays the LAG that the port is in.
3) Click
Apply
.
Note:
The member port of an LAG (Link Aggregation Group) follows the configuration of the LAG and not its
own. The configurations of the port can take effect only after it leaves the LAG.
3.1.2 Configuring Legal DHCPv6 Servers
Choose the menu
SECURITY > DHCP Filter > DHCPv6 Filter > Legal DHCPv6 Servers
and
click
to load the following page.
Figure 3-2
Adding Legal DHCPv6 Server
Follow these steps to add a legal DHCPv6 server:
1) Configure the following parameters:
Server IPv6
Address
Specify the IP address of the legal DHCPv6 server.
Server Port
Select the port that the legal DHCPv6 server is connected.
2) Click
Create
.
Downloaded from
