Configuring Access Security
Access Security Configurations
User Guide
509
Port
Select one or more ports. Only the users who are connected to these ports can
access the switch via the specified interfaces.
3) Click
Create
. Then you can view the created entries in the table.
2.1.2 Configuring the HTTP Function
Choose the menu
SECURITY
>
Access Security
>
HTTP Config
to load the following page.
Figure 2-5
Configuring the HTTP Function
1) In the
Global Control
section, enable HTTP function, specify the port using for HTTP,
and click
Apply
to enable the HTTP function.
HTTP
HTTP function is based on the HTTP protocol. It allows users to manage the
switch through a web browser.
Port
Specify the port number for HTTP service.
2) In the
Session Config
section, specify the Session Timeout and click
Apply
.
Session
Timeout
The system will log out automatically if users do nothing within the Session
Timeout time.
3) In the
Number of Access Users
section, enable Number Control function, specify the
following parameters and click
Apply
.
Downloaded from
