Toyota 2GR-FE, Руководство пользователя

Страница: 248 / 1021

ES–92
2GR-FE ENGINE CONTROL SYSTEM – SFI SYSTEM
ES
DESCRIPTION
The Variable Valve Timing (VVT) system includes the ECM, Oil Control Valve (OCV) and VVT controller.
The ECM sends a target duty-cycle control signal to the OCV. This control signal regulates the oil
pressure supplied to the VVT controller. Camshaft timing control is performed according to engine
operating conditions such as intake air volume, throttle valve position and engine coolant temperature.
The ECM controls the OCV, based on the signals transmitted by several sensors. The VVT controller
regulates the intake camshaft angle using oil pressure through the OCV. As a result, the relative positions
of the camshaft and crankshaft are optimized, the engine torque and fuel economy improve, and the
exhaust emissions decrease under overall driving conditions. The ECM detects the actual intake valve
timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.
This is how the target intake valve timing is verified by the ECM.
MONITOR DESCRIPTION
1. The ECM optimizes the intake valve timing using the VVT (Variable Valve Timing) system to control the
intake camshaft. The VVT system includes the ECM, the Oil Control Valve (OCV) and the VVT
controller.
DTC P0011
Camshaft Position "A" - Timing Over-Advanced
or System Performance (Bank 1)
DTC P0012
Camshaft Position "A" - Timing Over-Retarded
(Bank 1)
DTC P0021
Camshaft Position "A" - Timing Over-Advanced
or System Performance (Bank 2)
DTC P0022
Camshaft Position "A" - Timing Over-Retarded
(Bank 2)
DTC No. DTC Detection Condition Trouble Area
P0011
P0021
Advanced cam timing:
With warm engine and engine speed of between 500
rpm and 4,000 rpm, all conditions (1), (2) and (3) are
met (1 trip detection logic):
1. Difference between target and actual intake valve
timing is more than 5
°
CA (Crankshaft Angle) for 4.5
seconds
2. Current intake valve timing is fixed (timing changes
less than 5
°
CA in 5 seconds)
3. Variations in VVT controller timing is more than
19
°
CA of maximum delayed timing (advance)
• Valve timing
• Oil Control valve (OCV) for intake camshaft (bank
1)
• OCV filter (bank 1)
• Intake camshaft (bank 1) timing gear assembly
• ECM
P0012
P0022
Retarded cam timing:
With warm engine and engine speed of between 500
rpm and 4,000 rpm, all conditions (1), (2) and (3) are
met (2 trip detection logic):
1. Difference between target and actual intake valve
timing is more than 5
°
CA (Crankshaft Angle) for 4.5
seconds
2. Current intake valve timing is fixed (timing changes
less than 5
°
CA in 5 seconds)
3. Variations in VVT controller timing is 19
°
CA or less of
maximum delayed timing (retarded)
• Valve timing
• OCV for intake camshaft (bank 2)
• OCV filter (bank 2)
• Intake camshaft (bank 2) timing gear assembly
• ECM