manualshive.com logo in svg

TouchTunes Virtuo 700259-001, Инструкция по установке и настройке


Поделиться
Скачать
background image

Disclaimer

Document Part Number: 900475-001 Rev 11 December 2014

TouchTunes and the TouchTunes logo are trademarks of TouchTunes Interactive Networks. 

All other brand and product names are trademarks or registered trademarks of their respective 

corporations.

The mention of any product does not constitute an endorsement by TouchTunes Interactive Networks.

This manual is furnished under a lease agreement and may only be copied or used within accordance 
with the terms of such lease agreement. The content of this manual is furnished for informational use only, 
is subject to change without notice, and should not be construed as a commitment by TouchTunes 
Interactive Networks. TouchTunes Interactive Networks assumes no responsibility or liability for any 
errors or inaccuracies that may appear in this document.

Except as permitted by such lease agreement, no part of this publication may be reproduced, stored in 
any retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or 
otherwise, without prior written consent of TouchTunes Interactive Networks.

Changes are periodically made to the information herein; these changes will be incorporated into new 
editions of this publication. TouchTunes may make improvements and/or changes in the products and/or 
software programs described in this publication at any time.

If you have comments on this manual or the products it describes, address them to:
TouchTunes Interactive Networks

Attention: Publications

400 Sainte Croix Avenue, Suite 200 E
Montreal, Quebec, Canada H4N 3L4
Service Hotline: 1-847-353-1954
Fax: (847) 419-3304

TouchTunes may use or distribute whatever information you supply in any way it believes appropriate 
without incurring any obligations to you.

Copyright © 2014 TouchTunes Interactive Networks. All rights reserved, including those to reproduce this 
publication or parts thereof in any form without permission in writing from TouchTunes Interactive 
Networks.

Содержание Virtuo 700259-001

























































































































Отзывы:

Нет отзывов

Похожие инструкции для Virtuo 700259-001

Бренды по названию

Популярные бренды

Загрузить еще бренды