58
Connecting Other External Devices
Using external display devices
❖
TV (or other external video device) only
3
Release the
Fn
key.
TECHNICAL NOTE: You can also change these settings
using the Display Properties Box.
For more information on switching the display output, see
“Connecting the display device” on page 175
.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
TECHNICAL NOTE: In order to use one of the simultaneous
modes, you must set the resolution of the internal display
panel to match the resolution of the external display device.
The external display device must support a resolution of
640 X 480 or higher.
Video limitations
Keep in mind that the quality of the display will be limited to the
capabilities of the external video device.
❖
If the external video device, such as an SVGA monitor, is
capable of displaying at a maximum resolution of 640 x 480
and your system is set for a higher resolution, only part of the
desktop will appear on the screen. You can view the “lost”
area by scrolling to it.
❖
Since most televisions and video projectors overscan by 15 to
20 percent, some of the desktop will be outside the viewing
area. You can view the edge of the desktop by scrolling to it.
Содержание SpectraLink 6000 System
