168
Expansion Options
Using a mouse
Refer to your mouse documentation for configuration information.
Connecting a USB mouse
To connect a USB mouse, connect the mouse cable to the USB
port on the computer. Once connected, the mouse is ready to use.
Connecting a PS/2 mouse
CAUTION: Make sure the computer is off before you attach
the mouse. Connecting a PS/2 mouse with the computer’s
power on can damage the mouse, the computer, or both.
If you are connecting a mouse after you have started using the
computer, begin at step 1. Otherwise go to step 2.
1
Click Start, Turn Off Computer, then select Turn Off.
The operating system shuts off the computer.
2
Attach the PS/2 mouse cable to the PS/2 port on the computer.
HINT: Using an optional Y-cable allows you to connect a
PS/2 mouse and a PS/2 keyboard to the PS/2 port
simultaneously.
3
Refer to your mouse documentation for configuration
information.
To use both the PS/2 mouse and the AccuPoint II, set this up when
you have loaded the operating system.
Using a PS/2 mouse simultaneously with
AccuPoint II
To configure the PS/2 mouse to work with the AccuPoint II:
Содержание SpectraLink 6000 System
