Toshiba e-studio 211c, Руководство оператора

Страница: 150 / 225

1
2
3
4
5
6
7
8
9
10
11
12
8-13
5 Change the setting as required, then press the SET key.
- File format
Select a file format ( PDF , JPEG or TIFF ).
* When ‘Scan to IFax’ is also set, the file format is limited to
TIFF.
* When ‘Scan to E-mail’ and ‘Scan to FTP’ are set in combi-
nation, the file formats of both become the same. If either
of them changes in setting, the another one changes cor-
respondingly.
- Attachment/URL
ATTACHMENT: Select this to attach the scanned image data
to the E-mail message as an attachment and to send them.
URL: Select this to paste the URL into the body of a plain
text E-mail message without attaching the data to the E-mail
message. The receiver can download the scanned image data
from the printer controller (GA-1121/1131), referring to the
pasted URL to the data.
* If the size of the image data is over the limit setting size of
Fiery Setup for an attachment, it is necessary to paste the
URL into the body of E-mail message even though AT-
TACHMENT is selected here. See chapters 4 and 5 of
the Configuration Guide for more details about the set-
ting size of the attached image data.
Press the PREV key, then the screen goes back to the one
of step 3.
Sending IFax
How to set the ‘IFax’ after pressing the IFAX key is described in
step 8 in page 8-5.
6 The preparation to send the E-mail to the set
address is completed.
- The E-MAIL key is highlighted.
- If you want to select more than one destination, press the
corresponding keys in destination continuously.
- When all settings of destination are completed, go back to
in step 9 in page 8-5.