Toro Groundsmaster 4300-D, Руководство оператора

Страница: 51 / 80

Maintenance Service
Interval
Maintenance Procedure
Every 400 hours
• Service the air cleaner. (Or earlier if the air-cleaner indicator illuminates red. Service
it more frequently in extremely dirty or dusty conditions.)
• Replace the fuel filter.
• Inspect the fuel lines and connections.
• Replace the fuel filter canister.
Every 800 hours
• Drain and clean the fuel tank.
• Check the rear wheel toe-in.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, change the hydraulic fluid.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, replace the hydraulic filter (sooner if the service interval
indicator is in the red zone).
• Pack the rear-wheel bearings.
Every 1,000 hours
• If you are using the recommended hydraulic fluid, replace the hydraulic filter (sooner
if the service interval indicator is in the red zone).
Every 2,000 hours
• If you are using the recommended hydraulic fluid, change the hydraulic fluid.
Every 3,000 hours
• Disassemble, clean, and assemble the soot filter of the DPF. or clean the soot filter if
engine faults
SPN
3720
FMI
16 or
SPN
3720
FMI
0 display in the InfoCenter.
Before storage
• Drain and clean the fuel tank.
Every 2 years
• Flush and replace the cooling system fluid.
• Drain and flush the hydraulic tank.
• Replace the hydraulic hoses.
• Replace all moving hoses.
Important:
If you are performing maintenance on the machine and run the engine with an engine
exhaust-extraction duct, set the inhibit regen setting to ON; refer to Setting the Inhibit Regen (page 40) .
51