Toro Groundsmaster 4300-D, Руководство оператора

Страница: 21 / 80

InfoCenter Icon Description (cont'd.)
Operator should put machine in
neutral
Engine start is denied
Engine shutdown
Engine coolant is too hot
Hydraulic fluid is too hot
DPF ash accumulation notification.
Refer to Servicing the Diesel
Particulate Filter (DPF) in the
maintenance section for details
Reset-standby regeneration request
Parked or recovery regeneration
request
A parked or recovery regeneration is
processing.
High exhaust temperature
NOx control diagnosis malfunction;
drive the machine back to the shop
and contact your authorized Toro
distributor (software version U and
later).
The power take-off is disabled.
Sit down or engage the parking
brake.
Accessible only by entering PIN
Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for a synopsis of the options available from
the menus:
Main Menu—Menu Item Description
Faults Contains a list of the recent
machine faults. Refer to
the
Service Manual or your
authorized Toro distributor for
more information on the Faults
menu and the information
contained there.
Service Contains information on the
machine such as hours of use,
counters, and other similar
numbers
Diagnostics
Displays the state of each
machine switch, sensor, and
control output. You can use
this to troubleshoot certain
issues as it quickly tells you
which machine controls are
O
N
and which are O
FF
.
Settings Allows you to customize and
modify configuration variables
on the InfoCenter display.
About Lists the model number, serial
number, and software version
of your machine.
Service—Menu Item
Description
Hours Lists the total number of hours
that the machine, engine, and
PTO have been on, as well
as the number of hours the
machine has been transported
and service due
Counts Lists numerous counts the
machine has experienced.
DPF Regeneration The diesel particulate filter
regeneration option and DPF
submenus
Inhibit Regen Use to control reset
regeneration
Parked Regen Use to initiate a parked
regeneration
Last Regen Lists the number hours since
the last reset, parked, or
recovery regeneration
Recover Regen Use to initiate a recovery
regeneration
Diagnostics—Menu Item Description
Cutting Units Indicates the inputs, qualifiers,
and outputs for raising and
lowering the cutting units
21