HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
PACKAGE CONTENTS
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light
sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
Preparing for installation
1
Item #1005 698 176
Model #62805
□
Insert the two stakes into each
other’s slot.
□
Cut the connector between the
stakes (C).
□
Firmly insert the posts of the
assembled stake into the holes
on the bottom of the light body.
A
C
A
D
DECK
NOTE
: Do not use a hammer. If the ground is hard, use
water to soften it or a trowel to loosen the soil.
Installation options
2a
2
□
Push the assembly firmly into the ground.
Ground Installation
2b
□
Attach the light body on the deck (without the stakes) with screws
provided (D).
Deck or rail mount
A
C
A
D
DECK
Use and Care Guide
Solar LED Deck Light
A - Top cover x 4
B - AAA 1.2V 900mAh Ni-Mh
rechargeable battery (pre-installed) x 4
C - Stake x 4
□
Push the power button on the
bottom of the light body (A) to turn
the light on. Check that the light is
on by covering the solar panel with
your hand to simulate darkness.
NOTE
: The solar panel will turn
the light on automatically at
dusk.
D - Screw x 8
B
A
C
D
E
E - Anchor x 8
NOTE
: Screw anchors (E) are included for extra support. The
included screws are designed to screw easily into wood. If
you would like a more permanent or secure hold, install the
anchors prior to attaching the light to the surface.