Toro Groundsmaster 4300-D, Руководство оператора

Страница: 32 / 80

Choosing Accessories
Optional Equipment Configurations
Angle Sail Blade High-Lift, Parallel-Sail
Blade
(Do not use with
the mulching baffle)
(Not CE Compliant)
Mulching Baffle Roller Scraper
Grass Cutting: 1.9 to 4.4
cm (3/4 to 1-3/4 inches)
height of cut Recommended in most
applications May work well in light or
sparse turf
Grass Cutting: 5 to 6.4
cm (2 to 2-1/2 inches)
height of cut Recommended for thick
or lush turf Recommended for light
or sparse turf
Grass Cutting: 7 to 10
cm (2-3/4 to 4 inches)
height of cut May work well in lush turf
Recommended in most
applications
Has been shown to
improve dispersion and
after-cut performance
on northern grasses that
are cut at least 3 times
per week and less than
1/3 of the grass blade
is removed.
Do not
use with the high-lift,
parallel-sail blade
Leaf Mulching Recommended for use
with the mulching baffle Not Allowed Use with combination
sail or angle sail blade
only
Use it whenever the
rollers build up with
grass or large, flat grass
clumps of grass are
seen. The scrapers may
increase clumping in
certain applications.
Pros Even discharge at lower
height of cut; cleaner
look around bunkers and
fairways; lower power
requirements More lift and higher
discharge velocity;
sparse or limp turf is
picked up at high height
of cut; wet or sticky
clippings are discharged
efficiently May improve dispersion
and appearance in
certain grass cutting
applications; very good
for leaf mulching Reduces roller buildup
in certain applications
Cons Does not lift the grass
well in high height-of-cut
applications; wet or
sticky grass has a
tendency to build up in
the chamber, leading
to poor quality of cut
and higher power
requirements Requires more power to
run in some applications;
tends to windrow at
lower height of cut in
lush grass; do not use
with the mulching baffle Grass will build up in the
chamber if you attempt
to remove too much
grass with the baffle in
place
32