Toro Groundsmaster 4300-D, Руководство оператора

Страница: 20 / 80

InfoCenter Icon Description
SERVICE DUE Indicates when scheduled service
should be performed
Hours remaining until service
Reset the service hours
The status of the engine speed (rpm)
Info icon
Maximum traction speed setting
Fast
Slow
The fan is reversed.
The air-intake heater is active.
Raise the left cutting unit.
Raise the center cutting unit.
Raise the right cutting unit.
The operator must sit in the seat.
The parking brake is engaged.
The range is high.
Neutral
Identifies the range as Low
Coolant temperature (°C or °F)
Temperature (hot)
Traction or Traction Pedal
Not allowed
Start the engine.
The PTO is on.
InfoCenter Icon Description (cont'd.)
The cruise control is on.
Shut off the engine
Engine
Key switch
Cutting units are lowering
Cutting units are raising
PIN code
Hydraulic fluid temperature
CAN bus
InfoCenter
Bad or failed
Center
Right
Left
Bulb
Output of TEC controller or control
wire in harness
Over the allowed range
Under the allowed range
/
Out of range
Switch
Operator must release switch
Operator should change to indicated
state
Symbols are often combined to form sentences. Some
examples are shown below.
20