Toro Groundsmaster 4300-D, Руководство оператора

Страница: 18 / 80

g021208
Figure 12
1. Lower mow/raise control
lever 4. Enable/disable switch
2. Key switch 5. Engine-speed switch
3. InfoCenter 6. Headlight switch
Key Switch
The key switch ( Figure 12 ) has 3 positions: O
FF
,
O
N
/P
REHEAT
, and S
TART
.
Lower Mow/Raise Control Lever
The lower mow/raise control lever ( Figure 12 ) raises
and lowers the cutting units and also starts and stops
the cutting units when the cutting units are enabled in
the mow mode. When starting the cutting units in the
down position, this lever will turn the cutting units on if
the PTO and the mow speed limiter are engaged.
Enable/Disable Switch
Use the enable/disable switch ( Figure 12 ) in
conjunction with the lower mow/raise control lever to
operate the mowers. The mowers cannot be lowered
when the mow/transport lever is in the T
RANSPORT
position.
Hydraulic-Filter-Restriction
Indicator
The hydraulic-filter-restriction indicator alerts you
when the hydraulic filters must be changed; refer to
Replacing the Hydraulic Filters (page 68) .
g031683
Figure 13
1. Hydraulic-filter-restriction indicator
Power Point
The power point ( Figure 14 ) is a 12 V power supply
for electronic devices.
g004133
Figure 14
1. Power point
Seat-Adjustment Controls
Refer to Figure 15 for an illustration of the
seat-adjustment controls.
•
The seat-adjustment lever allows you to adjust the
seat forward and rearward.
•
The weight-adjusting knob adjusts the seat for
your weight.
•
The weight gauge indicates when the seat is
adjusted to your weight.
•
The height-adjusting knob adjusts the seat for
your height.
18