Toro Groundsmaster 4300-D, Руководство оператора

Страница: 45 / 80

5. The InfoCenter displays the I
NITIATING
DPF
R
EGEN
message ( Figure 54 ).
g224411
g227681
Figure 54
6. The InfoCenter displays the time to complete
message (
Figure 55 ).
g224406
g224406
Figure 55
7. The engine computer checks the engine state
and fault information. The InfoCenter may
display the following messages found in the
table that follows:
Note:
If you attempt to do a forced parked
regeneration before 50 hours of the last
sucessful regeneration this message will appear.
If the machine is requesting a regeneration and
this message appears contact your authorized
Toro distributor for service.
Check Message and Corrective Action Table
Corrective Action: Exit the regeneration menu and run the
machine until the time since last regeneration is greater than
50 hours; refer to
Time Since Last Regeneration (page 38) .
Check Message and Corrective Action Table
(cont'd.)
Corrective Action: Troubleshoot the engine fault and retry
DPF regeneration.
Corrective Action: Start and run the engine.
Corrective Action: Run the engine to warm the coolant
temperature to 60°C (140°F).
Corrective Action: Change the engine speed to low idle.
Corrective Action: Troubleshoot the engine computer
condition and retry DPF regeneration.
8. The InfoCenter displays the home screen and
the regeneration acknowledge icon (
Figure 56 )
appears in the lower right corner of the screen
as the regeneration processes.
g224403
Figure 56
45