Toro Groundsmaster 4300-D, Руководство оператора

Страница: 22 / 80

Hi/Low Range Indicates the inputs, qualifiers,
and outputs for driving in
transport mode
PTO Indicates the inputs, qualifiers,
and outputs for enabling the
PTO circuit
Engine Run Indicates the inputs, qualifiers,
and outputs for starting the
engine
Settings—Menu Item Description
Units
Controls the units used on the
InfoCenter (English or Metric)
Language Controls the language used
on the InfoCenter*
LCD Backlight Controls the brightness of the
LCD display
LCD Contrast Controls the contrast of the
LCD display
Protected Menus
Allows a person authorized
by your company with the
PIN code to access protected
menus
Protect Settings
Allows the ability to change
the settings in the protected
settings
Counterbalance
Controls the amount of
counterbalance applied to the
cutting decks
Protected under Protected Menus—accessible only
by entering PIN
About—Menu Item Description
Model Lists the model number of the
machine
SN Lists the serial number of the
machine
Machine Controller Revision Lists the software revision of
the master controller
InfoCenter Revision Lists the software revision of
the InfoCenter
CAN Bus Lists the machine
communication bus status
Protected Menus
There are 2 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter:
auto idle time delay and counterbalance. To lock
these settings, use the Protected Menu.
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M
AIN
M
ENU
, use the center button to
scroll down to the S
ETTINGS
M
ENU
and press the
right button ( Figure 17 ).
g028523
Figure 17
2. In the S
ETTINGS
M
ENU
, use the center button to
scroll down to the P
ROTECTED
M
ENU
and press
the right button ( Figure 18 A).
22